To reserve time with this equipment, go this Google Calendar for the UM-S3-A, this Google Calendar for the UM-S3-B, and this Google Calendar for the UM-S7. If you do not have access to the calendar, scroll down to the calendar below and click on “Add to Google Calendar” at the bottom left corner. Otherwise, contact the Lab Manager at [email protected].

UM-S3-A:

https://calendar.google.com/calendar/embed?src=c_bf99c2b8b6c03bdf8aa4a99c0473c75d9c00719618eaf83a27820981e595b00f%40group.calendar.google.com&ctz=America%2FNew_York&mode=WEEK

UM-S3-B:

https://calendar.google.com/calendar/embed?src=c_1f616dac7359a1bf2923cc67b2e398bcf6e256727c476e644695837609716dbe%40group.calendar.google.com&ctz=America%2FNew_York&mode=WEEK

UM-S7:

https://calendar.google.com/calendar/embed?src=c_dfb5a8754e73cb7e004fa7bd62ed79f1a4b219aac0092bc9173a6f97e1b8f35d%40group.calendar.google.com&ctz=America%2FNew_York&mode=WEEK

<aside> 💡

General Advice from Robotics Lab Manager

If you wish to estimate your print job ahead of time in order to create a calendar reservation in advance (without modifying it again on Google Calendar), you can download Cura on your computer/laptop. After downloading Cura, you can utilize the generic profiles provided by Cura (ex. UM-S3, UM-S7, etc.) to verify the printing time after slicing your desired object.

</aside>

Quick Links:

UM Materials Log Form

UM Resources

UM Troubleshooting

Random But IMPORTANT UM Things to Know:

• All materials use the AA print core EXCEPT for PVA.
  • PVA uses the BB print core.
• When doing a long print with the UM-S7, make sure that you have two rolls of the material you’re using in the material station so that if one roll runs out, it’ll load the second roll and keep printing.

Quick Information:

• Requires Certification from Lab Manager
• FDM 3D printer